FDG5000-big flange refacing

Product Detail

FDG6000 Heavy Flange Facing

A specially developed for large flange-site processing equipment, such as: offshore platform crane flange hull propeller flange, using milling processing methods to meet the fast and high-precision production requirements.

Feature Description

?Using high-power motor input, cutting capacity, high production efficiency.

?Folder knife disc standard size is 250mm, but also holding cutter, for machining the hole, cylindrical, sealing groove.

?High precision, flatness less than 0.1mm.

?Power options: servo?hydraulic.

?Equipped with remote control box with convenient operation and high safety factor.

FDG6000 CIRCULAR MILLING SETUP



FDG6000 APPLICATION(1)

	?Heavy structure, equipped(standard) with F250mm milling cutter, maximum cutting depth can reach 3 mm ?Faster machining ?Radial Travel per Setup: 500mm ?Flatness Tolerance:0.03mm/m
?Spindle taper: #50 ?Max milling cutter: F315mm ?Spindle travel: 200mm ?Can processing seal groove, for example:10*8mm

FDG6000 APPLICATION(2)






Technical Detail

Min facing diameter	6000mm
Max facing diameter:	2500mm
Rotation R.P.M	0-5
Drive -electric
Rotational Power	1KW
Spindle Power	3KW/5KW
Drive –Hydraulic
Rotational Power	BG200
Spindle Power	BG100
Hydraulic supply	25HP
Spindle R.P.M: 0-800	0-800
Cutter Diameter	250mm

Test Data



DRIVE UNIT



? Rotation power unit: 1kw

?Spindle milling power unit: 3kw

?3 phase,380V/415V



1	Hydraulic power unit, 10HP(7.5KW),38L/min
2	Hydraulic power unit, 15HP(11KW), 38L/min
3	Hydraulic power unit, 20HP(15KW), 38L/min
4	Hydraulic power unit, 25HP(18.5KW), 60L/min

Note:remote control box can achieve operation from some distance away,with high safety. The voltage of control wire is 24V, and the lengthis 5 meter.

STANDARD EQUIPMENT

SERVO

Turning arm	2 Pcs
Turning arm rotating base	1 Set
Spindle mounting base	1 Set
Spindle milling head	1 Set
Spindle power unit:3kw	1 Set
Radial slide	1 Set
Rotation feed unit	2 Set
Rotation power unit :1kw	1 Set
Electric control box	1 Set
ID chuck body	1 Set
Leg sections	3 Set
Milling cutter:250mm	1 Set
Hand wheel	3 Pcs
Manual	1 Set
Tool Pack	1 Set
Packing list	1 Set
Packing case	1 Set

HYDRAULIC

Turning arm	2 Pcs
Turning arm rotating base	1 Set
Spindle mounting base	1 Set
Spindle milling head	1 Set
Spindle power unit:BG100	1 Set
Radial slide	1 Set
Rotation feed unit	2 Set
Rotation power unit :BG200	1 Set
Hydraulic unit &Electric control box	1 Set
ID chuck body	1 Set
Leg sections	3 Set
Milling cutter:250mm	1 Set
Hand wheel	3 Pcs
Manual	1 Set
Tool Pack	1 Set
Packing list	1 Set
Packing case	1 Set

Note: The above configuration list is recommended by JOYSUNG, using the specific parameters of the check on the right side of the table, if the configuration cannot meet

DTH is a professional exporter of fdg5000-big flange refacing, which is also known as one of the most credible such manufacturers and suppliers. You can rest assured to buy or wholesale customized fdg5000-big flange refacing which is made in China at low price with our factory.